Detailed Product Description

Gas leak size:11x7x4cm

Detector:10x6.6x8.5cm 

1. Select the installation location

  Control Division - convenient location. Easy to operate hand position.

  cut the department - in charge of the Ministry of Road cut off valve is installed.

  Alarm - Gas alarm installation position due to the different types of gas, its installation location is also different. Please confirm in advance the type of gas.

  LPG, gas (weight): ratio of the large proportion of air from within the installation of ground-30CM.

  LNG, gas (light): more than a small proportion of air from the ceiling within 30CM to install.

 2. Cutting Device Installation Method

    * To cut off the device into the valve on the main channel after the valve handle and cut off the central axis of the drive shaft into a vertical docking device, fixed to the valve into the gear box on the top, with a fixed cut off wrench device.

 3. Control Division, cut off the department, alarm wiring methods.

 * The Control Unit may be a gas leak alarm linkage of three loops.

 * Open the controller front panel, as shown connected to the terminal.

 * Wires should be an adequate cushion to cut the Department of the Ministry to ensure the control, control the Ministry of alarm links.

 * The alarm signal lines on the link to the Control Division of the signal terminal.

 * Control Division of the Ministry of connection with the cut off, +, - very connected to accurately (red + pole; black - pole).

 * After the wiring connections, in accordance with methods of operation, the various steps to confirm the action.